适配器

 每页条目 
20
 1 - 20 / 205 
Control panel for Mobile Gas Flare M
新的
Connection adapter 1 inch external thread, including pressure reducer and integrated valve for connecting the Mobile Gas Flare M to gas pipes.

- Integrated pressure reducer for restricting the inlet pressure at the mobile gas flare (max. 1bar)
- Integrated shut-off valve for safe gas inlet and flow restriction
- Series 21 coupling and screw coupling for connecting a pressure or concentration measuring device
- 1" ET on the inlet side, Camlock coupling DN25 on the outlet side
- max. pressure 16 barAdapter S5020N-T5010K-T5010K with ball valve
新的
Optional additional part to the Test head HEINZ for 
carrying out water pressure tests according to W400-2.
The pressure hose of the pump and an EDS2-V can be 
connected to the HEINZ at the same time via the T-piece.
Connections:
T-piece With nipple Series 5020 (Series 5000) and 
2x coupling Series T 5010 with ball valve (Series 5000)Adapter C25C to 1 inch with O-ring seal
新的
Adapter for the Mobile Gas Flare M for use in hard-to-reach blow-out units. 
Connections: inlet side 1" ET with O-ring, outlet side Сamloсk coupling DN25 Gas hose DN25 with Сamloсk nipple can be connected directly.
Max. pressure 16 bar
Adapter DN claw coupling to S5020N
新的
Claw coupling with connecting nipple series 5020T-connector C25N-C25C-C25C
新的
T-connector with camlock connections for parallel operation of two devices of Mobile Gas
Flare M
max. pressure 16 barAdapter ventilation with sound insulation
新的
with nipple series 5020 can be used with test body HANSAdapter DN15C to 2x DN15C
新的
Compressed air manifold DN15 with claw coupling and ball valve on the inlet side, 2 outlets with claw coupling on the outlet side for simultaneous pressurisation of pipelines, e.g. for tests according to FW 602.
Max. pressure: 16 barT-piece C25C/S20C/C25N
新的
Optional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare M.
The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also
required.T-piece C15C/S20C/C15N
新的
Optional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare S.
The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also required.Adapter S21C to S26C
新的
Adapter from quick coupling Series 21 to compressed air coupling (nominal size 7.2) Series 26 
P. max 35 barAdapter S5020N to T2510C
新的
Adapter for use of HEINZ accessories (nipple series 2500) with test head HANS (coupling series 5000)
Nipple Series 5020 to coupling Series T 2510v-Measuring tube C25
新的
Optional accessory for the Mobile Gas Flare M for measuring and monitoring flow velocity in conjunction with the GOLIATH.
The GOLIATH is connected via a suitable hose connection set to measure the speed and the gas concentration (Coupling Series 20).
Connections on the input side: Camlock nipple DN25
 on the output side: Camlock coupling DN25.

Length: approx. 50 cmT-piece C50N-C50C-C50C
新的
T-distributor Camlock DN 50 for simultaneous connection of 2 gas flares L or XL.Pressure reducer Mobile Gas Flare L with V-measurement connection
新的
- Pressure reducer to limit the inlet pressure on the mobile gas flare
- Camlock nipple DN50 on the inlet side
- Camlock coupling DN50 on the outlet side
- Series 20 coupling for measuring the gas concentration/outlet pressure (V measurement)
- max. operating pressure 16 bar
The outlet pressure is set to the ideal range for the Mobile Gas Flare L at the factory. This must not be changed!Camlock angle adapter DN50
新的
90 degree Camlock adapter
- Camlock nipple DN50 to Camlock coupling DN50
- material: brassAdapter 1620N to 1/4 IT made of stainless steel
Adapter nipple 1620 to 1/4 internal thread
Adapter for screwing onto coupling.
Other connections can be made via the 1/4 inch internal thread.
Material: stainless steel
max. operating pressure 630 barCoupling series T2510 internal thread G1/4
Pmax = 450barAdapter test coupling S21C to 1/8 inch
Adapter test coupling series 21 to 1/8 inch for measuring at the 1/8 inch connection of the controllerFlow reducer for DWZ/EDS2-V
- additional accessories for reducing volume flow
for small drainage volumes up to approx. 500 ml
- Geka couplingAdapter test coupling S21K to 1/8" inch angled
Adapter test coupling series 21 to 1/8" inch to measure at the 1/8" connection of the regulator. Version with rotatable angle for hard to reach connections. 每页条目 
20
 1 - 20 / 205 