适配器

Adapter for the Mobile Gas Flare M for use in hard-to-reach blow-out units. Connections: inlet side 1" ET with O-ring, outlet side Сamloсk coupling DN25 Gas hose DN25 with Сamloсk nipple can be connected directly. Max. pressure 16 bar

T-connector with camlock connections for parallel operation of two devices of Mobile Gas Flare M max. pressure 16 bar

Optional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare M. The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also required.

Optional adapter for using the v-measurement in the OLLI for the Mobile Gas Flare S. The appropriate connecting hose for v-measurement with the OLLI (article 285076) is also required.

Adapter from quick coupling Series 21 to compressed air coupling (nominal size 7.2) Series 26 P. max 35 bar

Optional accessory for the Mobile Gas Flare M for measuring and monitoring flow velocity in conjunction with the GOLIATH. The GOLIATH is connected via a suitable hose connection set to measure the speed and the gas concentration (Coupling Series 20). Connections on the input side: Camlock nipple DN25 on the output side: Camlock coupling DN25. Length: approx. 50 cm

T-distributor Camlock DN 50 for simultaneous connection of 2 gas flares L or XL.

90 degree Camlock adapter - Camlock nipple DN50 to Camlock coupling DN50 - material: brass

Connection adapter 1 inch external thread, including pressure reducer and integrated valve for connecting the Mobile Gas Flare M to gas pipes. - Integrated pressure reducer for restricting the inlet pressure at the mobile gas flare (max. 1bar) - Integrated shut-off valve for safe gas inlet and flow restriction - Series 21 coupling and screw coupling for connecting a pressure or concentration measuring device - 1" ET on the inlet side, Camlock coupling DN25 on the outlet side - max. pressure 16 bar

Adapter nipple 1620 to 1/4 internal thread Adapter for screwing onto coupling. Other connections can be made via the 1/4 inch internal thread. Material: stainless steel max. operating pressure 630 bar

Pmax = 450bar

Adapter test coupling series 21 to 1/8 inch for measuring at the 1/8 inch connection of the controller

Optional additional part to the Test head HEINZ for carrying out water pressure tests according to W400-2. The pressure hose of the pump and an EDS2-V can be connected to the HEINZ at the same time via the T-piece. Connections: T-piece With nipple Series 5020 (Series 5000) and 2x coupling Series T 5010 with ball valve (Series 5000)

- additional accessories for reducing volume flow for small drainage volumes up to approx. 500 ml - Geka coupling

Adapter test coupling series 21 to 1/8" inch to measure at the 1/8" connection of the regulator. Version with rotatable angle for hard to reach connections.

Adapter measuring coupling 1620 to 1/4 inch external thread Material: stainless steel max. operating pressure 630bar

Adapter nipple 1620 to 1/4 inch internal thread Material: Free machining steel max. operating pressure 630 bar

Coupling and nipple series 17

Pmax = 35bar

Adapter nipple series 21 to Camlock coupling DN 25 max. pressure 16 bar