连接软管

Pressure hose DN 20 x 10 meters for MPP 70-35 both. series 5020 plug nipple and protective cap

Hose set for use of the V-measurement in the OLLI for the mobile gas flare S, M and L CH4. On the inlet side there is a single hose connection with S20 nipple, which is plugged into a suitable coupling in the connection area of the mobile gas flare. On the outlet side, there are two hoses with S20 couplings for concentration measurement (red hose, pressure reducer 50 mbar integrated) and for pressure measurement (black hose) in the OLLI.

for MPP 30 and MPP 68 both-sided plug nipple 5020 and protection cap

gas hose, length 10 m for Mobile Gas Flare M NBR, both sides Camlock Adapter. Coupling DN 25 on one side, nipple DN 25 on the other, max. pressure 16 bar

- for tightness and stress test - with drain valve and two couplings S 20 for connection of hand pump and pressure measurement instrument - cross fitting for connection to coupling S 21 - max. pressure 2 bar

- drain hose for use with the test head HANS and EDS2-V - nominal diameter DN16 for low pressure loss and optimal flow rate - Geka coupling on one side, nipple S 5020 on the other side

with connection nipple series 21, ball valve for HESV

Gas hose DN 50, length 10 m - electroconductive hose with R < 10 to the 6 Ohm with Camlock coupling and Camlock nipple - operating pressure 16 bar - operating temperature: -30 °C to +80 °C short-period 95 °C - bend radius 408 mm - NBR

for pressure testing on both sides of two-pipe meters. The two paths can be blocked separately by ball valves.

gas hose, length 5 m for Mobile Gas Flare M NBR, both sides Camlock Adapter. Coupling DN 25 on one side, nipple DN 25 on the other, max. pressure 16 bar

for serviceability & regulator test with nipple to connect the pressure balloon for safety valve test to conduct a manual regulator test. For serviceability test and automatic regulator test the nipple remains unused.

gas hose, length 5 m for Mobile Gas Flare S NBR, both sides Camlock Adapter. Coupling DN 15 on one side, nipple DN 15 on the other, max. pressure 10 bar

Gas hose DN 32, length 10 m - electroconductive hose with R < 10 to the 6 Ohm with Camlock coupling and Camlock nipple - operating pressure 20 bar - operating temperature: -30 °C bis +80 °C short-period 95 °C - bend radius 256 mm - NBR

Exhausting hose electroconductive length: 10 m with nipple S 21 and ball valve for the gas exhausting highly flexible, inner diameter 8 mm with 3,5 mm wall thickness flow rate ca. 2 m³/h at 20 - 30 mbar

Connecting hose for Druktest max spiral hose 6 m with 2 couplings, series 17 and series 21

for MPP 11 an MPP 28 both-sided plug nipple 5020 and protection cap

red 4 mm, length: 2 m

In- and output tube with gas bubble to pressure bumpless usability testing

Connection hose Tygon 6,4 x 1,6mm incl. T-piece and drain valve

Filling hose water -Storz C - 15 m for drinking water (accessory pipe hanger) brass couplings