menu

类别

产品

搜索

search

shopping_cart购物篮0设备技术0设备选项0软件0外部传感器0仪器箱标签0泵和压缩机0燃气火炬0标定台管路0消毒0 chevron_right 连接配件 chevron_right 检测配件 chevron_right 充电技术 chevron_right 运输和储存 chevron_right 配件操作说明0

标定台管路

水check_box_outline_blank是的check_box_outline_blank不

check_box_outline_blank是的check_box_outline_blank不

每页条目

20

1 - 20 / 29

Standpipe hydrant foot DN 80, stainles

Standpipe hydrant foot DN 80, stainless for pressure tests with testhead int. thread G 2 1/2"

Gas standpipe without blow-off pipe

- connection for test head HEINZ 2 1/2" ext. thread with ball valve - separate coupling connection possibility - connection for grounding cable

Flame arrester DN 50 for gas standpipe

- for gas test standpipe - safe device to prevent flame breakthrough into gas pipeline or gas tank - IBExU 09 ATEX 2019 X, explosion group EEx IIG IIA (for example methane or propane) according to DIN EN ISO 16852 - brass-made adapter with 2 1/2 internal thread/ext. thread (with sealings) for direct connection to the gas test standpipe

Standpipe hydrant foot 2", stainless

Standpipe hydrant foot 2", stainless for pressure tests with testhead

Tripod for gas standpipe

- with 3 hooks and 2 fixing clips to fasten the gas stand pipe

Venturi nozzle for gas standpipe

- with 2 1/2 internal thread/ext. thread for connection to the gas standpipe - compressed air claw coupling for the compressed air supply

Ignition module for gas standpipe

Ignition module for gas standpipe - accessory not included

Diffuser/Muffler V2 2"

The diffuser for the blow-off/measuring pipe v 2" provides outstanding noise reduction. It was optimized for operation at extremely high temperatures. It can be installed onto the blow-off pipe's 2" thread.

Diffuser for gas standpipe

- stainless steel diffuser, ø 160 mm - 1 ext. thread for connection to the gas standpipe

Standpipe, DN 50, 1x Storz C system separator

Standpipe, DN 50, 1x Storz C system separator with shut-off valve Standpipe DN 80 VA/MS 1x C Ms System separator suitable for drinking water

Guy rope set for gas standpipe/mobile flare L

3x hook incl. rope and tension clamps

Standpipe flange DN 50, stainless

Standpipe flange DN 50, stainless for pressure tests with testhead int. thread G 2 1/2" - Separate feed via Storz C for filling with shut-off via ball valve - sampling valve - a 50cm long standpipe extension with standpipe foot DN 50 (System Baden-Württemberg) can be screwed on.

Muffler for gas standpipe

Muffler for gas standpipe - with 1" ext. thread for screwing into the diffuser - maximum allowable device temperatur is 600°C

Blow-off pipe 1" for gas standpipe

Blow-off pipe 1" for gas standpipe incl. holder ignition module for blow-off pipe 1" The blow-off pipe1" can be placed into the Gas standpipe for the transport.

Gas venting pipe light PL

Gas venting pipe Aluminium pipe system, extension connected with Kamlok coupling, earth rod, gas measurement quick connector, Kamlok connection for hose, including Kamlok connection with 3/4" thread for use on pipe.

Standpipe DN 80, 1x Storz C , drinking water

with shut-off valve Standpipe DN 80 VA/MS 1xC Ms suitable for drinking water

Blow-off pipe 2" for gas standpipe

Blow-off pipe 2" for gas standpipe incl. holder ignition module for blow-off pipe 2" Total length: 1 m

Blow-off/measuring pipe v 2"

Blow-off/measuring pipe v 2" incl. holder ignition module for blow-off pipe 2" and two plugs Blow-off pipe with integrated pitot tube for flow speed measurement and monitoring in combination with GOLIATH. Connection to GOLIATH for speed and gas concentration measurements is realised by a hose-connecting set (separately available). The outlet end of the blow-off pipe has a 2" external thread on which the diffuser/muffler can be screwed down. Length: 1 m

Standpipe extension blow-off/measuring pipe v 2", 0.5 metres

Standpipe extension with integrated pitot tube for measuring and monitoring the flow velocity in connection with GOLIATH. Connection of GOLIATH via hose connection set for measuring the velocity and gas concentration. The standpipe extension is equipped with an adapter 2 1/2" internal thread at the outlet so that a blow-off pipe 2" can be mounted. A 1" blow-off pipe can also be mounted using a suitable reducer.

Flame arrester DN 50 hydrogen for gas stand pipe

- safe component against flame flashback into the pipe or tank - IBExU 11 ATEX 2056 X, explosion group IIC, according to DIN EN ISO 16852 - connection via tank truck system, tank truck coupling male part on both sides Please follow the instructions in the separately enclosed operating manual!

每页条目

20

1 - 20 / 29