产品
燃气火炬 Mobile Gas Flare
Mobile Gas Flare - 402480
Mobile Gas Flare L - CH4 (incl. transport case)
Mobile Gas Flare for safe and environmentally friendly flaring of natural gas, and other combustible gases.
To avoid operation-related methane emissions during commissioning and decommissioning of pipelines (according to German DVGW worksheet G 404).
Suitable for supply/distribution lines.
Suitable for emptying of gas tank/storage facilities.
- incl. transport case
- integrated pilot flame with propane supply and piezo igniter, continuous ignition up to 8 h (1x AA battery), incl. 2 replacement batteries
- quickly ready for use, short set-up time, high flow rate and low-emission combustion
- integrated flame arrester for gases of the explosion groups: IIA, IIA1
- max. operating pressure 1 bar
- estimated flow rate of approx. 400 Nm3/h methane at 1 bar
- combustion efficiency under ideal conditions approx. 99%
- connection accessories available separately
Meets the requirements of the EU Methane Regulation
The reduction of methane emissions in the gas grid has been an ambitious project for years and is getting more and more attention due to the EU Methane Regulation. Flaring of natural gas is a common method to significantly reduce operational methane emissions (blow-off emissions during flushing).
Recently, the method has also been anchored in the newly published DVGW Code of Practice G 404. Against the background of increasing hydrogen feed-in and individual hydrogen pipelines, flaring of hydrogen is also gaining in importance. Mobile flares are described in G 404 as an effective tool for reducing gas emissions. This applies equally to the low, medium and high pressure ranges. We offer you the right mobile flare for every case of application.
Variants
The Mobile Flare S was specially developed for house connections or mains connection lines. It is extremely compact and ready for use in just a few minutes.
The Mobile Flare M has a throughput approx. 10 times greater than the Mobile Flare S and is used for flaring gas in the low- and medium-pressure network in the area of the distribution pipelines. It is also compact and quickly ready for use.
The Mobile Gas Flare L has an even greater throughput and is intended for the medium- and high-pressure network. Due to its height of approx. 2.5 m, it consists of two parts that can be assembled in just a few minutes without any additional tools.
All flares have an integrated continuous ignition for stable combustion and a flame arrester to protect the pipeline. The Mobile Gas Flare L also has a pilot flame with which the gas mixture is ignited.
Further optional applications:
Safe emptying of LPG tanks
Our Mobile Gas Flare offers safety and efficiency, as well as easy handling for environmentally friendly disposal of liquid gas residues. Thanks to the robust and compact design of the flare, it is ideal for everyday workshop use or mobile specialised operations.
LPG tanks may only be emptied by siphoning or flaring in a specially designated area. Please refer to the extracts from the DGUV, the DVFG and the TAK.
Download
Sample inspection protocol for mobile gas flares
We have compiled a sample inspection protocol for our mobile gas flares and offer you the form for free download. Simply fill out the form.
Measurement of the flow velocity
Our mobile gas flares are designed for flaring gas as part of gassing and degassing processes. Flaring natural gas is many times more environmentally friendly than simply venting it, as the natural gas is not released directly into the atmosphere and the climate impact of the exhaust gas is reduced by a factor of 25.
When purging pipes, our mobile gas flares can be used in combination with the OLLI gas measuring device to measure the flow velocity in the pipe (currently only possible with the Mobile Gas Flares S and M, in future also with the Mobile Gas Flare L). The amount of methane or propane flared is also recorded. This is important in the context of the documentation obligation for network operators in accordance with the EU regulation on the reduction of methane emissions. The requirements of DVGW regulations G 465-2 and G 404 are also implemented.
In the video you can see our Mobile Gas Flare S in action.
Application example: flaring of propane and methane
In the video you can see our Mobile Gas Flare M in action.
Application example: flaring methane and hydrogen
Download
Annotated extract from the EU Methane Regulation
We have an annotated extract from the EU Methane Regulation, specifically relating to the oil and gas sector, for you to download. With our assessments and ideas regarding requirements for measurement, reporting and verification.
Technical data
| Mobile Gas Flare S | Mobile Gas Flare M | Mobile Gas Flare L | |
| Max. volume flow | approx. 8 Nm3/h at 1 bar | approx. 40 Nm3/h at 1 bar | approx. 400 Nm3/h at 1 bar |
| Max. pressure flare inlet | 1 bar | ||
| Max. pressure accessories | 10 bar | 16 bar | |
| Flare ignition type | Piezo spark igniter with manual or permanent ignition | Pilot flame with piezo igniter | |
| Power supply piezo igniter | 1x battery Mignon AA | ||
| Max. ignition duration | max. 8 h permanent ignition per AA-battery | ||
| Flaring approved for the following gases | Natural gas, propane, hydrogen | Natural gas, propane | |
| Flame arrestor approved for explosion groups | IIA, IIA1, IIB, IIC | IIA, IIA1 | |
| Efficiency | 99 % under ideal conditions | ||
| Height, diameter set-up area | 685 mm, 490 mm | 650 mm, 520 mm | 2.500 mm, 1.265 mm |
| Weight | 2.850 g | 3.670 g | approx. 20 kg |